Installs in Bennett
Strata Heat Pumps installs heat pumps in Bennett, in every ZIP code listed on this page. The online estimate gives a price range and your rebates for a Bennett address in about two minutes.
Heat pump options for Bennett homes
Bennett has 1,114 homes, and 1,108 are occupied. Census figures show 88% are owner occupied. Detached houses make up 82.9% of local homes, compared with 62.6% in Adams County and 61.8% in Colorado. That housing mix puts central equipment and ductwork at the center of many Bennett heating decisions.
The median Bennett home was built in 1989 and has 6.2 rooms. Adams County has a 1990 median build year and 5.8 median rooms. Colorado has a 1987 median build year and 5.7 median rooms. Bennett homes are close in age to county homes, but they tend to have more rooms to heat and cool.
Bennett has 4.6% of homes in multiunit buildings. Adams County has 22.9%, while Colorado has 26.9%. Detached-home system planning deserves the largest share of attention here. Ductless equipment still suits condos, attached homes, and spaces that central ducts do not reach.
Mobile homes make up 9% of Bennett housing, compared with 5.8% in Adams County and 3.6% statewide. Every home needs its own equipment plan. We measure the home and inspect its ducts and electrical panel before we install.
Bennett compared with nearby towns
Utility gas heats 81.7% of Bennett homes. Strasburg is close at 80.7%, so both towns have a large group of homes to consider for ducted heat pumps or dual fuel. Watkins has 27.2% gas heat, while Brick Center and Comanche Creek have 0%. Current heating fuel matters more than townwide averages.
Propane heats 5.8% of Bennett homes. That is lower than Watkins at 28.7%, Brick Center at 28.2%, and Comanche Creek at 93.5%. Bennett homeowners replacing propane can qualify through the gas and propane rebate route when they are Xcel Energy customers. Propane is a much larger part of heating decisions in those nearby towns.
Detached houses account for 82.9% of Bennett homes and 83.2% in Strasburg. Watkins has 97.1% detached homes, while Brick Center and Comanche Creek each have 100%. Bennett has 4.6% multiunit buildings, compared with 6.6% in Strasburg and 0% in the other nearby towns.
Bennett's 1989 median build year is older than Strasburg at 1999, Watkins at 2001, and Comanche Creek at 2009. Homes built before 1960 make up 9.7% of Bennett, compared with 10.3% in Strasburg and 6.5% in Watkins. Older homes call for a closer review of insulation, duct size, and room layout.
Systems that fit Bennett housing
A ducted heat pump suits many of Bennett's 82.9% detached houses when central ducts are usable. Heat pumps move heat instead of burning fuel, and they also cool. We inspect ducts before installation because the duct system affects how well a heat pump can serve the home's rooms.
Dual fuel fits homes that use utility gas and want to keep the gas furnace for the coldest hours. Utility gas serves 81.7% of Bennett homes, compared with 68.8% in Adams County and 66.7% statewide. The heat pump provides heating and cooling, while the furnace stays available for the coldest hours.
Ductless heat pumps fit homes without ducts, additions, and condos. Attached houses account for 3.5% of Bennett homes, and multiunit buildings account for 4.6%. Ductless equipment also gives separate indoor units to rooms that need their own heating and cooling plan.
The housing age mix shapes this choice. Homes built from 1980 to 1999 account for 32.3% of Bennett homes. Another 27% were built before 1980. Older homes are more likely to lack ducts or have small ducts, making ductless equipment or duct upgrades part of the evaluation.
Sizing a heat pump for Bennett cold
Our estimate tool sizes equipment to 1°F outdoors and 70°F indoors, using 5,300 ft. Air-source units lose 18% of heat output at that elevation. At the design temperature, our settings use a coefficient of performance of 2. Equipment selection must account for cold weather and elevation, not floor area alone.
For a 2,000 square foot, 2-story Bennett home with a gas furnace built from 1980 to 1999, the design load is 2.8 tons. The example needs a 30 A breaker. This build period is Bennett's largest at 32.3% of homes, so it gives a useful local starting point.
Build year changes the modeled load for the same 2,000 square foot, 2-story gas home. A home built before 1960 sizes at 3.4 tons. A home built from 1960 to 1979 sizes at 3.2 tons. A home built from 2000 to 2009 sizes at 2.4 tons.
A home built in 2010 or later sizes at 2.0 tons under the same example assumptions. Homes from 2000 to 2009 make up 21.5% of Bennett housing, and 19.1% were built in 2010 or later. We confirm the actual home's layout, ducts, and electrical capacity before final sizing.
Bennett heat pump prices and rebates
For the 2,000 square foot, 2-story example home, a ducted heat pump is $15,100 to $27,900 before rebates and $8,400 to $21,200 after rebates. A dual-fuel system is $12,100 to $22,500 before rebates and $5,400 to $15,800 after rebates. Our estimate tool provides these price ranges for the stated home and equipment assumptions.
For a gas-heated home, the 3-ton ducted rebate total is $7,000. That total includes the Xcel Energy rebate ($4,500), the State of Colorado Heat Pump Discount ($1,000) and the Power Ahead Colorado rebate ($1,500). Bennett has 81.7% utility gas heat, so this is the relevant rebate path for a large share of local homes. We file every rebate for the homeowner.
Electricity heats 12.5% of Bennett homes. A 3-ton ducted heat pump for an electric-heated home has a rebate total of $4,700, which includes the Xcel Energy rebate ($2,200), the State of Colorado Heat Pump Discount ($1,000) and the Power Ahead Colorado rebate ($1,500). Propane heats 5.8% of local homes. A 3-ton ducted propane replacement has a rebate total of $7,000 through the Xcel Energy rebate ($4,500), the State of Colorado Heat Pump Discount ($1,000) and the Power Ahead Colorado rebate ($1,500).
The State of Colorado Heat Pump Discount applies to every Colorado home on any of the three systems, and it comes off the invoice. Homes in Adams County qualify for the Power Ahead Colorado rebate on any of the three systems. The federal 25C credit ended for systems installed after 2025-12-31.
How ZIP code 80102 changes the plan
ZIP code 80102 has 2,098 homes and a 1990 median build year. Its utility gas heating share is 59.7%, lower than Bennett's 81.7%. Propane heats 19% of ZIP code homes, compared with 5.8% in Bennett. The current fuel at the address sets the rebate route and equipment conversation.
Electric heat serves 12.9% of ZIP code 80102 homes, close to Bennett's 12.5%. Detached houses account for 84.6% of ZIP code homes, close to Bennett's 82.9%. Those figures keep ducted and dual-fuel planning relevant for many homes, while ductless remains a fit where ducts are absent.
Multiunit buildings make up 3.8% of ZIP code 80102 homes, below Bennett's 4.6%. Homes built before 1960 account for 14.3% of the ZIP code, above Bennett's 9.7%. This older share makes a duct inspection and room-by-room load review important before equipment selection.
Homes built in 2010 or later account for 11.8% of ZIP code 80102, below Bennett's 19.1%. The online estimate takes about 2 minutes, and a winter gas bill makes it more accurate. Most installs take 1 day. Jobs with several ductless units can take 2 or 3 days.
Bennett in numbers
| Homes | Median year built | Built before 1960 | Built 2010 or later | Gas heat | Electric heat | Propane | |
|---|---|---|---|---|---|---|---|
| Bennett | 1,114 | 1989 | 9.7% | 19.1% | 81.7% | 12.5% | 5.8% |
| Adams County | 191,765 | 1990 | 13.5% | 14.9% | 68.8% | 27.1% | 2% |
| Colorado | 2,545,124 | 1987 | 16.3% | 14% | 66.7% | 25.2% | 4.9% |
| ZIP | Main town | Homes | Median year built | Heat with gas | Electric utility | Install area |
|---|---|---|---|---|---|---|
| 80102 | Bennett | 2,098 | 1990 | 59.7% | Xcel Energy | Yes |
Systems and rebates in Adams County
- Ducted heat pump in Adams CountyPrices by home age and the Adams rebates for this system.
- Dual-fuel heat pump in Adams CountyPrices by home age and the Adams rebates for this system.
- Ductless mini-split in Adams CountyPrices by home age and the Adams rebates for this system.
- Heat pump rebates in Adams County$7,000 on a 3-ton gas home, program by program.
- Pool heat pumps in Adams CountyPool and spa heat pumps: local code rules, running cost and the swim season.
Other towns we install in
Questions we hear
Which heat pump system fits most Bennett homes?
Ducted heat pumps fit many Bennett homes because 82.9% are detached houses and 81.7% use utility gas. Dual fuel fits gas-heated homes that want to retain the furnace for the coldest hours. Ductless equipment fits homes without ducts, additions, condos, and some of the 4.6% of homes in multiunit buildings.
How is a Bennett heat pump sized?
Our estimate tool uses 1°F outdoors, 70°F indoors, and 5,300 ft for sizing. Air-source equipment loses 18% of output at that elevation. A 2,000 square foot, 2-story gas-heated home built from 1980 to 1999 has a modeled design load of 2.8 tons and a 30 A breaker.
What rebates apply to a gas-heated Bennett home?
A 3-ton ducted heat pump for a gas-heated home has a total rebate amount of $7,000. It includes the Xcel Energy rebate ($4,500), the State of Colorado Heat Pump Discount ($1,000) and the Power Ahead Colorado rebate ($1,500). The State of Colorado Heat Pump Discount applies to every Colorado home and comes off the invoice. We file every rebate for the homeowner.
What does the example Bennett home cost?
For the 2,000 square foot, 2-story gas-heated example home, a ducted heat pump costs $15,100 to $27,900 before rebates and $8,400 to $21,200 after rebates. Dual fuel costs $12,100 to $22,500 before rebates and $5,400 to $15,800 after rebates. Actual equipment selection follows a home measurement, duct inspection, and electrical-panel check.
How many ductless indoor units does a Bennett home need?
The ductless example covers 1,500 square feet with 3 indoor units. Our estimate uses about 500 sq ft of floor area per indoor unit and prices up to 5 indoor units before a custom quote. The example price is $11,800 to $19,200 before rebates and $7,800 to $15,200 after rebates.